3. Select IntelliLink. The Postage by Phone account number, Distributor URL, and Backup data
center URL for the system appear. These fields are automatically populated by Pitney Bowes.
l
If necessary, select a field, type in the parameter and select OK.
Note:
Changes to the IntelliLink® parameters may result in errors when connecting to Pitney
Bowes.
l
If necessary, select the Reset to Factory Settings button to revert to the default values for
these fields.
4. Select the Home button to return to the Home screen.
Viewing DI900™/DI950™ inserter communication settings
This option allows you to view the communication settings for your inserting system interface. The
communication settings are viewed within the Settings application.
1. Select Settings under Mailing on the Home screen.
2. The Settings screen displays. Select Internet & Network from the list on the left side of the
screen.
3. Select Inserting System.
System settings
The System settings allow you to customize your mailing system to meet your needs.
l
Timeouts: Use this feature to set the system timeouts.
l
Clock: Use this feature to synchronize the system clock, set the time zone, and to enable or
disable Daylight Saving time.
l
Scanner Settings: This feature allows you to configure the optional barcode scanner to easily
locate an account on your system. You can scan for account name, account code, job name,
job ID (1 or 2). When the scanner detects the account it automatically fills in the appropriate field
or fields on the Run Mail screen.
l
Automatic Date Advance: Use this feature to set your system to advance the date at the mail
pickup time.
System Setup
Pitney Bowes User Guide April 2022 180
To Next Page
Loading...
