This module has the ability to weigh and measure shape for each mailpiece whilst the system is
running.
Running mail - quick start
Note: If you have accounts enabled on your system, you must select an account before you can run
a mail job.
1. Select the Run Mail button in the Mailing tile on the Home screen.
2. Ensure that the appropriate job is open and selected on the Run Mail screen.
3. Load the envelopes.
4. Check the postage amount on the screen.
5. Check the sealer setting.
6. Select Start or Tape to run the job.
Run Mail screen icons and buttons
Button, Icon, or Link Touching or Selecting:
Tape Preview icon Displays a preview of the tape to be printed.
Tape Preview image Opens the Edit Envelope screen allowing you to make changes to your
envelope.
Running mail
Pitney Bowes User Guide April 2022 49
To Next Page
Loading...
