Pitney Bowes SendPro P2000 - Setting up Shipping Label Printing Defaults; Reprinting a USPS Shipping Label

l
Reprint this USPS Label - refer to Reprinting a USPS shipping label.
l
Reprint this FedEx or UPSLabel - refer to Reprinting a FedEx or UPS label.
l
Create a Return Label (USPS Only) - Refer to Creating a USPS return label.
l
Void a USPS, FedEx or UPS Label - Refer to Voiding a shipping label.
Setting up shipping label printing defaults
To choose the print settings you'd like to automatically apply to all new labels, select Settings in the
Shipping tile on the Home screen. The Printing Defaults screen opens.
On this screen, check or uncheck the checkboxes to:
l
Show or hide the shipping cost on the printed label
l
Print a receipt with the shipping label.
Select a default label type (Plain Paper – 8 ½ x 11 or Roll - 4 x 6) from the Choose Format drop-down
menu.
The Printing Defaults screen also allows you to enable the printing of USPS SCANforms. Refer to
How to print a USPS SCAN form in SendPro for more information.
Reprinting a USPS shipping label
Note:
You can reprint a shipping label once, after printing it the first time, or from the shipping label's
record on the History screen. You have up to 24 hours from the initial printing to reprint.
To reprint a shipping label you’ve just printed:
1. On the Carrier screen you will see the message "Label Completed" .
2. Click the Reprint This Label link next to the "Label Completed" message.
3. You’ll see a Reprint Label dialog box with some conditions. If you agree to them, check the
check box.
4. Click the Reprint button.
SendPro Shipping Solution
Pitney Bowes User Guide April 2022 114