The power receptacle is located either on the back or the left side of the system. It connects to the AC
power cord (supplied).
1. Old power receptacle
2. New power receptacle
On newer models, a power switch is fitted. A green light illuminates when the switch is in the on
position. If the green light does not illuminate, please contact service personnel for support.
Manual adjustments
You may need to make the following manual adjustments before you run a job.
For all systems:
l
Set the Thickness Adjustment Knob
For optional features:
l
Adjust the Side Guide
l
Set the Wet/Dry Sealer Lever
l
Adjust the Drop Stacker
Getting started
Pitney Bowes User Guide April 2022 22
To Next Page
Loading...
