Viewing and exporting communication settings
This option allows you to view the communication settings for your system and export them to a USB
drive. The communication settings are viewed within the Settings application.
1. Select Settings under Mailing on the Home screen.
2. Select Internet & Network from the list on the left side of the screen.
3. Select Communication Settings. The IP address, Synchronous port, Asynchronous port, Host
name, Machine ID, and Machine password for the system are displayed. These fields are
automatically populated by Pitney Bowes.
If it is necessary for you to export the communications settings, insert a USB drive into an available
port on the mailing system.
The communication settings are typically exported to set up the SendSuite Xpress™ and Ascent™
interface with the SendPro P system.
1. Select Export settings to USBdrive....
2. Select the File name field.
a. Type in the file name.
b. Select OK.
3. Select the Export to field.
a. Select the folder on the USB drive where you want to export the file.
b. Select Open.
4. Select OK to export the communication settings.
5. The system will alert you when the export is complete. Select OK.
6. Select Done to return to the Home screen.
Viewing the IntelliLink® settings
This option allows you to view the connection parameters for your postage account. The IntelliLink®
settings are viewed within the Settings application.
1. Select Settings under Mailing on the Home screen.
2. Select Internet & Network from the list on the left side of the screen.
System Setup
Pitney Bowes User Guide April 2022 179
To Next Page
