Turning off user logins
Important: Supervisor access rights are required to manage users.
Turning off user logins will disable all system security. Account passwords, if used, will be disabled
and all system functions will be unlocked. User information will be stored on the system, should you
want to enable users again at a later date.
1. Select Settings under Mailing on the Home screen.
2. Select System from the list on the left side of the screen.
3. Select Users.
4. On the User setup tab, a check mark appears in the Enable user logins... check box. Select
Enable user logins... to remove the check mark from the check box.
5. A warning message displays. Select Yes, turn off user logins.
Viewing the status of rates, software, features, and graphic updates
1. Select Settings under Mailing on the Home screen.
2. Select System from the list on the left side of the screen.
3. Select Configuration.
4. There are five tabs along the top of the screen related to rates and software status.
l
The Messages tab tells you whether your rates and software are up-to-date.
l
The Basic system info tab contains the system name, model, serial number and meter
number.
l
The Rates & software tab contains the active and pending rates and the associated
effective dates.
l
The Features & graphics tab contains a list of the rates and optional software features
available on your system, as well as the hardware components that make up the your
system. For example, hardware components include the type of scale and its capacity, and
the type of connectivity (wireless LAN).
l
The Credits tab contains copyright and permission notices for the software on your system.
5. Select the Home button to return to the Home screen.
System Setup
Pitney Bowes User Guide April 2022 193
To Next Page
