This reduces the wear on your machine and acts as a safety measure if you leave the machine
unattended.
1. Select Settings under Mailing on the Home screen.
2. Select Hardware from the list on the left side of the screen.
3. Select Feeder.
4. Select Edit next to the Waiting for envelopes timeout.
5. Select the appropriate length of time.
l
Select Stop machine automatically after rollers stop if you want the feeder to stop after
the last envelope is processed.
l
Select Wait for envelopes until stop is pressed if you want the feeder to continue running
until you press the Stop button.
l
Select Wait for envelopes for: if you want the feeder to continue running for a short
amount of time after the last envelope is processed. Select and drag the control button to
adjust the timeout. Use the + and - buttons for a more precise selection.
6. Select OK to accept any changes you have made.
7. Select the Home button to return to the Home screen.
Changing the scale vibration setting
You can turn the vibration filter on if your mailing system is in an environment subject to vibrations,
such as near air-conditioning vents or closing doors. If you select this, the scale will require more time
to settle before displaying a weight.
1. Select Settings under Mailing on the Home screen.
2. Select Hardware from the list on the left side of the screen.
3. Select Attached scale.
4. Select Adjust for motion to enable the vibration filter. Select Normal to disable the vibration
filter.
5. Select the Home button to return to the Home screen.
Zeroing the scale
You may need to zero the scale if the scale will not display zero weight.
System Setup
Pitney Bowes User Guide April 2022 195
To Next Page
