3. Select OK. The new job appears as a tab at the top of the Run Mail screen.
4. To save other PresortXtra jobs, select Carrier again as described in Setting up the PresortXtra
job and repeat the process.
5. Run a sample mailpiece to verify that the proper inscription appears on the envelope or tape.
6. To upload the single mailpiece data, go to the Home screen and select the Settings button. The
Settings screen displays.
a. Select System from the list on the left side of the screen.
b. Select Postal Information Upload.
c. Select Upload postal information now.
7. Fax the sample mailpiece to the Mail Services Customer Center at 203-617-3939 and call them
at 1-866-624-5724 to let them know that the setup is complete.
8. Go to Running a PresortXtra job.
Running mail
Pitney Bowes User Guide April 2022 99
To Next Page
Loading...
