Planet GT-915A - Product Features

User’s Manual of GT-915A
11
1.4 Product Features
Physical Port
 One 1G/100/10BASE-T RJ45 interface with auto MDI/MDI-X function
 One 1G/100BASE-X SFP interface
Layer 2 Features
 Supports VLAN
− IEEE 802.1Q tagged VLAN
− Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
− VLAN transparent
 Storm Control support
− Broadcast/Multicast/DLF (Destination Lookup Failure)/ARP/ICMP
 Store-and-Forward mechanism
 Non-blocking full wire-speed forwarding rate
 16K jumbo frame size support
 Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
 Automatic address learning and address aging
 Supports port status/Ethernet statistics on both TP and fiber interfaces
 Supports Link Fault Passthrough (LFP) and Link Layer Discovery Protocol (LLDP)
OAM Compliant
 TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
Quality of Service
 Ingress Shaper and Egress Rate Limit per port bandwidth control
 8 priority queues on all converter ports
 Strict priority and Weighted Round Robin (WRR) CoS policies
 Traffic classification
- IEEE 802.1p CoS
- IP DSCP
- IP Address
Management
 IPv4 and IPv6 dual stack management
 Management Interfaces
− Web HTTP management
− Telnet Command Line Interface
− SNMP v1, v2c monitoring
− SSHv2, TLSv1.2 and SNMP v3 secure access
 System Maintenance
− Firmware upload/download via HTTP
− Reset button for system reboot or reset to factory default