User’s Manual of GT-915A
Button
: press this button to take effect.
4.5.1.2 HTTPS
Configure HTTPS on this page. The HTTPS Configuration screen in Figure 4-64 appears.
Figure 4-64: HTTPS Configuration Page Screenshot
The page includes the following fields:
Object Description
• Certificate Upload
Upload a certificate PEM file into the switch. The file should contain the certificate
and private key together. If you have two separated files for saving certificate and
private key. Use the Linux cat command to combine them into a single PEM file.
For example, cat my.cert my.key > my.pem
Notice that the RSA certificate is recommended since most of the new version of
browsers has removed support for DSA in certificate, e.g. Firefox v37 and
Chrome v39.
Possible methods are:
Web Browser: Upload a certificate via Web browser.
URL: Upload a certificate via URL, the supported protocols
are HTTP, HTTPS, TFTP and FTP. The URL format is
<protocol>://[<username>[:<password>]@]<
host>[:<p
ort>][/<pat
h>]/<file_name>.
For example,
tftp://10.10.10.10/new_image_path/new_image.dat,
http://username:password@10.10.10.10:80/new_image_path/new_image.dat. A
valid file name is a text string drawn from alphabet (A-Za-z), digits (0-9), dot (.),
hyphen (-), under score(_). The maximum length is 63 and hyphen must not be
first character. The file name content that only contains '.' is not allowed.
Button
: press this button to take effect.
To Next Page
Loading...
Need help?
General
