User’s Manual of GT-915A
3. MEDIA CONVERTER MANAGEMENT
This chapter explains the methods that you can use to configure management access to the Managed Media Converter. It
describes the types of management applications and the communication and management protocols that deliver data between
your management device (workstation or personal computer) and the system. It also contains information about port connection
options.
This chapter covers the following topics:
Requirements
Management Access Overview
Administration Console Access
Web Management Access
SNMP Access
Standards, Protocols, and Related Reading
3.1 Requirements
Workstations running Windows XP/2003/2008/Vista/7/8/10/11, MAC OS X or later, Linux, UNIX, or other platforms
are compatible with TCP/IP protocols.
Workstations are installed with Ethernet NIC (Network Interface Card)
Ethernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ45 connectors.
The above PC is installed with Web browser.
It is recommended to use Chrome 98.0.xxx or above to access the Managed Media Converter.
3.2 Management Access Overview
The Managed Media Converter gives you the flexibility to access and manage it using any or all of the following methods:
An administration console
Web browser interface
An external SNMP-based network management application
The administration console and Web browser interface support are embedded in the Managed Media Converter software and
are available for immediate use. Each of these management methods has their own advantages. Table 3-1 compares the three
management methods.
To Next Page
Loading...
Need help?
General
