Planet GT-915A - SNMP Configuration; SNMP View Table

User’s Manual of GT-915A
44
4.2.3.1 SNMP Configuration
The SNMP Host Table provides to set SNMP settings; the configured column is used to input the selected operation modes of
SNMP State, SNMP Trap and SNMP Link Change Traps as the screen in Figure 4-17 appears.
Figure 4-17: SNMP Configuration Page Screenshot
The page includes the following fields:
Object Description
• SNMP State
Enable or Disable the Managed Media Converter SNMP function on this page.
• SNMP Trap
Enable or Disable the Managed Media Converter SNMP trap function on this
page.
•
SNMP Link Change
Traps
Enable or Disable the
Managed Media Converter SNMP Link Change trap
function on this page.
Button
: press this button to take effect.
4.2.3.2 SNMP View Table
The SNMP View Table provide to set view rules for allow or deny access to certain MIB objects, the configured column is used
to input the view name, subtree OID and change the view type. The screen in Figure 4-18 appears.