User’s Manual of GT-915A
Create SNMP
views and groups are required to use, the security level of the user needs to be the same
as the security level of the group.
4.2.3.5 SNMP Community Table
The SNMP User Table provides to set SNMP community settings; the configured column is used to input the community name,
and select the group name for access group as the screen in Figure 4-21 appears.
Figure 4-21: SNMP Community Table Configuration Page Screenshot
The page includes the following fields:
Object Description
• Community Name
Configure the Managed Media Converter community name information on this
page, the maximum length is 20 characters.
• Access Group
Select the exist access group.
Buttons
: press this button to take effect.
: press this button to delete.
To Next Page
Loading...
