Planet GT-915A - SNMP User Table

User’s Manual of GT-915A
47
Buttons
: press this button to take affect.
: press this button to delete.
The SNMP group needs to create the view before group create.
4.2.3.4 SNMP User Table
The SNMP User Table provide to set SNMP user settings, the configured column is used to input the user name, select the
group name and input the password for Auth-Protocol MD5 /Priv-Protocol DES. The screen in Figure 4-20 appears.
Figure 4-20: SNMP User Table Configuration Page Screenshot
The page includes the following fields:
Object Description
• User Name
Configure the Managed Media Converter user name information on this page,
the maximum length is 20 characters.
• Group Name
Select the exist SNMP group.
• Auth-Protocol MD5
Set the authorization password with using the MD5 authentication level, the
available length is 8 to16 characters.
• Priv-Protocol DES
Set the authorization password with using the standard DES private encryption
protocol, the available length is 8 to16 characters.
Buttons
: press this button to take affect.
: press this button to delete.