Planet GT-915A - SNMP Group Table

User’s Manual of GT-915A
46
4.2.3.3 SNMP Group Table
The SNMP View Table provide to set SNMP Group settings, the configured column is used to input the group name, change the
Read, Write, Notify view type and Security Model /Level. The screen in Figure 4-19 appears.
Figure 4-19: SNMP Group Table Configuration Page Screenshot
The page includes the following fields:
Object Description
• Group Name
Configure the Managed Media Converter group name information on this page,
the maximum length is 20 characters.
• Read View
Choose the Read View and available options are:
 None: Set none for Read View status.
 systemview: Set systemview for Read View status.
• Write View
Choose the Write View and available options are:
 None: Set none for Read View status.
 systemview: Set systemview for Write View status.
• Notify View
Choose the Notify View and available options are:
 None: Set none for Read View status.
 systemview: Set systemview for Notify View status.
• Security Model
Indicates the SNMP supported version. Possible versions are:
 SNMP v1: Set SNMP supported version 1.
 SNMP v2: Set SNMP supported version 2c.
 SNMP v3: Set SNMP supported version 3.
• Security Level
Available when choose the SNMPv3 in Security Model. Possible versions are:
 NoAuthNoPriv: None authentication and none privacy.
 AuthNoPriv: Authentication and none privacy.
 AuthPriv: Authentication and privacy.