EasyManua.ls Logo

Planet GT-915A - VLAN Port Config

Planet GT-915A
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Users Manual of GT-915A
71
GVRP (GARP VLAN Registration Protocol) maintains VLAN dynamic registration information for GVRP
devices based on the working mechanism of GARP to maintain VLAN dynamic registration information that
supports GVRP devices.
And propagate this information to other devices in order to achieve agreement on VLAN information for all
devices supporting GVRP in the same LAN.
The VLAN registration information propagated by GVRP includes both local manual static registration
information and dynamic registration information from other switches.
4.3.4.5 VLAN Port Config
This page is used for configuring the Managed Media Converter port VLAN. The VLAN per port configuration page contains
fields for managing ports that are part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN port configuration
page. All untagged packets arriving to the device are tagged by the ports PVID.
Understanding Nomenclature of the Switch
IEEE 802.1Q Tagged and Untagged
Every port on an 802.1Q compliant switch can be configured as tagged or untagged.
Tagged:
Ports with
tagging enabled will put the VID number, priority and other VLAN information into the
header of all packets that flow into those ports. If a packet has previously been tagged, the port
will not alter the packet, thus keeping the VLAN information intact. Th
e VLAN information in the
tag can then be used by other 802.1Q compliant devices on the network to make
packet-forwarding decisions.
Untagged:
Ports with untagging enabled will strip the 802.1Q tag from all packets that flow into those
ports. If the packet doesn't have an 802.1Q VLAN tag, the port will not alter the packet. Thus,
all packets received by and forwarded by an untagging port will have no 802.1Q VLAN
information. (Remember that the PVID is only used internally within the Switch). Untagging is
used to send packets from an 802.1Q-compliant network device to a non-compliant network
device.
Frame Income
Frame Leave
Income Frame is tagged Income Frame is untagged
Leave port is tagged Frame remains tagged Tag is inserted
Leave port is untagged Tag is removed Frame remains untagged
Table 4-45: Ingress / Egress Port with VLAN VID Tag / Untag table

Table of Contents

Other manuals for Planet GT-915A

Related product manuals