User Manual of WDAP-C1750
-92-
6.4.4 Access Control
Mac filtering is a security feature that can help to prevent unauthorized users from connecting to your access
point. This function allows you to define a list of network devices permitted to connect to the access point.
Devices are each identified by their unique MAC address. If a device which is not on the list of permitted MAC
addresses attempts to connect to the access point, it will be denied.
The MAC address filtering table is displayed below.
Figure 6-21 NMS Settings—Access Control
Object Description
Add MAC Address
Enter a MAC address of computer or network device manually e.g.
‘aa-bb-cc-dd-ee-ff’ or enter multiple MAC addresses separated
with commas, e.g. ‘aa-bb-cc-dd-ee-ff,aa-bb-cc-dd-ee-gg’
Add
Click “Add” to add the MAC address to the MAC address filtering
table.
Reset
Clear all fields.
To Next Page
Loading...
