User Manual of WDAP-C1750
-15-
Figure 3-1 WDAP-C1750 Installation Diagram 1
For Other Ceilings
1. Drill four holes in your ceiling using the mounting bracket as a guide, and insert the four screw anchors.
2. Align the mounting bracket with your screw anchors and use the four self-tapping screws to fix it into place.
3. Attach the AP to the mounting bracket by aligning the grooves in the AP.
4. Secure the AP firmly in place using the thumb screw.
Figure 3-2 WDAP-C1750 Installation Diagram 2
To Next Page
Loading...
