User Manual of WDAP-C1750
-78-
5. Network Connectivity
Go to the “Network Connectivity” panel to perform Trace Route.
6. Restart
Restarts the Managed AP.
6.3.2 Managed AP Group
Managed APs can be grouped according to your requirements. Managed AP Group displays information about
each Managed AP group in the local network: Group Name, MAC Address, Device Name, Model, IP Address,
2.4GHz & 5GHz Wireless Channel Number, No. of Clients connected to each access point, and Status
(connected or disconnected).
Figure 6-4 NMS Monitor—Managed AP Group
To edit Managed AP Groups, please go to NMS Settings Access Point
6.3.3 Active WLAN
Displays information about each SSID in the AP Array: Index (reference number), Name/SSID, VLAN ID,
Authentication, Encryption, IP Address and Additional Authentication.
To configure encryption and VLAN for Managed APs, please go to NMS Settings WLAN.
Figure 6-5 NMS Monitor—Active WLAN
To Next Page
Loading...
