User Manual of WDAP-C1750
-43-
5.3.5 5GHz 11ac 11an Basic Settings
The “5GHz 11ac 11an” menu allows you to view and configure information for your access point’s 5GHz wireless
network across four categories: Basic, Advanced, Security and WDS.
The “Basic” screen displays basic settings for your access point’s 5GHz Wi-Fi network (s).
Figure 5-17 5GHz Wireless Settings
The page includes the following fields:
Object Description
Wireless
Enable or disable the access point’s 5GHz wireless radio.
When disabled, no 5GHz SSIDs will be active.
Band
Select the wireless standard used for the access point.
Combinations of 802.11a, 802.11n and 802.11ac can be selected.
Enable SSID
Number
Select how many SSIDs to enable for the 5GHz frequency from the drop-down
menu.
A maximum of 16 can be enabled.
SSID#
Enter the SSID name for the specified SSID (up to 16).
The SSID can consist of any combination of up to 32 alphanumeric characters.
VLAN ID
Specify a VLAN ID for each SSID.
Auto Channel
Enable/disable auto channel selection. Auto channel selection will automatically
set the wireless channel for the access point’s 5GHz frequency based on
availability and potential interference.
When disabled, select a channel manually as shown in the next table.
To Next Page
Loading...
Need help?
General
