User Manual of WDAP-C1750
-63-
5.4.2 Date and Time
You can configure the time zone settings of your access point here. The date and time of the device can be
configured manually or can be synchronized with a time server.
Figure 5-34 Time and Date
The page includes the following fields:
Object Description
Local Time Set the access point’s date and time manually using the drop-down
menus.
Acquire Current Time
from your PC
Click “Acquire Current Time from Your PC” to enter the required values
automatically according to your computer’s current time and date.
Use NTP The access point also supports NTP (Network Time Protocol) for
automatic time and date setup.
Server Name Enter the host name or IP address of the time server if you wish.
Update Interval Specify a frequency (in hours) for the access point to
update/synchronize with the NTP server.
Time Zone Select the time zone of your country/ region. If your country/region is not
listed, please select another country/region whose time zone is the
same as yours.
To Next Page
Loading...
Need help?
General
