Planet WDAP-C1750 User Manual

User Manual of WDAP-C1750
-19-
Figure 4-1 TCP/IP Setting
Now click OK to save your settings.
Now, you can run the ping command in the command prompt to verify the network connection between your
PC and the AP. The following example is in Windows 7 OS. Please follow the steps below:
1. Click on Start > Run.
2. Type “cmd” in the Search box.
Figure 4-2 Windows S
tart Menu

Planet WDAP-C1750 Specifications

General

Brand	Planet
Model	WDAP-C1750
Category	Wireless Access Point
Language	English