User Manual of WDAP-C1750
-53-
5.3.10 RADIUS Settings
The RADIUS sub menu allows you to configure the access point’s RADIUS server settings, categorized into
three submenus: RADIUS settings, Internal Server and RADIUS accounts.
A RADIUS server provides user-based authentication to improve security and offer wireless client control –
users can be authenticated before gaining access to a network.
The access point can utilize both a primary and secondary (backup) RADIUS server for each of its wireless
frequencies (2.4GHz & 5GHz). External RADIUS servers can be used or the access point’s internal RADIUS
server can be used.
Figure 5-26 RADIUS Settings
The page includes the following fields:
Object Description
RADIUS Type
Select “Internal” to use the access point’s built-in RADIUS server or
“external” to use an external RADIUS server.
RADIUS Server
Enter the RADIUS server host IP address.
Authentication
Port
Set the UDP port used in the authentication protocol of the RADIUS server.
Value must be between 1 and 65535.
Shared Secret
Enter a shared secret/password between 1 and 99 characters in length.
To Next Page
Loading...
