Planet WDAP-C1750 - Page 95

User Manual of WDAP-C1750
-85-
Beacon Interval
Set the beacon interval of the wireless radio. The default value is
100.
Station idle timeout
Set the interval for keep alive messages from the access point to a
wireless client to verify if the station is still alive/active.
Changing these settings can adversely affect the performance of your access point.
6.4.1.5. Profile Settings
Figure 6-14 NMS Settings—Access Point Profile Settings
Object Description
WLAN Group
A
ssign the access point’s 2.4GHz or 5GHz SSID(s) to a WLAN
Group. You can edit WLAN groups in NMS Settings  WLAN.
RADIUS Group
A
ssign the access point’s 2.4GHz SSID(s) to a RADIUS group.
You can edit RADIUS groups in NMS Settings  RADIUS.
Access Control Group
A
ssign the access point’s 2.4GHz SSID(s) to a RADIUS group.
You can edit RADIUS groups in NMS Settings  Access
Control.