User Manual of WNAP-6325
-48-
Step 5. Save the setting and connect your WAN port of the Wireless AP to the internet via Ethernet cable.
In a remote computer, enter the DDNS host name as the figure shown below. Then, you should be able to login
the WNAP-6325 remotely.
Example of Easy DDNS Settings:
This service is not required to register any DDNS account.
Please refer to the procedure listed as follows to configure using Planet Easy DDNS service.
Step 1. Select “Enable Easy DDNS” to use the Planet Easy DDNS service.
Easy Domain Name: Display the specified domain name for this device. (Format: ptxxxxxx.planetddns.com,
xxxxxx is the last six-digit of the WAN Port MAC address)
To Next Page
Loading...
Need help?
General
