Planmeca ProMax X-ray User Manual

Chapter A - GENERAL & TECHNICAL DATA
A-2 ProMax X-ray unit with Dimax3
MANUAL VERSIONS
Technical Manual
2MANUAL VERSIONS
Planmeca pursues a policy of continual product development. Although every effort is made
to produce up-to-date product documentation this publication should not be regarded as an
infallible guide to current specifications. We reserve the right to make changes without prior
notice.
The installed software revision determines the available functions and behaviour of the unit. If
the unit is reporting error or help messages not listed in this manual, please refer to a newer
revision of the manual.
NOTE This manual is valid for CPU software version 1.19.5.0 or later.
If you find service modes described in this manual that do not exist in the unit, please
update the unit software to the latest version.
3SYMBOLS
Type B applied part (Standard IEC 60601-1).
Alternating current (Standard IEC 60417).
Attention, consult accompanying documents (Standard IEC 60601-1).
X-ray source assembly: emitting (Standard IEC 60417).
Temple supports.
Electrostatic sensitive device (Standard IEC 60417)
Separate collection for electrical and electronic equipment according to Directive 2002/96/EC
(WEEE).

Planmeca ProMax X-ray Specifications

General

Brand	Planmeca
Model	ProMax X-ray
Category	Medical Equipment
Language	English