4.59
500 EFI FUEL SYSTEM
4
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
Digital Wrench™ Version and Update ID
Knowing what Digital Wrench™ version and update is
installed will help determine which updates are required.
NOTE: Versions and updates are subject to change.
1. Open the Digital Wrench™ software. Locate the
version ID shown on the lower right side of the Digital
Wrench™ start-up screen.
2. Proceed to http://polaris.diagsys.com to see if a
newer update is available.
3. If a newer update is available, it should be
downloaded before using Digital Wrench™ (see
“Digital Wrench™ Updates”).
IMPORTANT: Always operate with the latest update.
Digital Wrench™ Updates
Updates are released for Digital Wrench™ via the Internet
at: http://polaris.diagsys.com. The Digital Wrench™
website can also be accessed through the dealer website
at: www.polarisdealers.com.
NOTE: Only authorized Polaris dealers and
distributors can access the dealer website.
1. Log on to www.polarisdealers.com.
2. Locate the “Service and Warranty” drop-down
menu.
3. Click on “Digital Wrench Updates”.
4. The Digital Wrench™ portal website should appear in
a new web browser.
5. Click on “Digital Wrench Version Updates”.
IMPORTANT: You must already have the current
version installed before adding an update. Updates
will not install if you are using an older version loaded
on your PC.
To Next Page
Loading...
Need help?
General
