10.8
ELECTRICAL
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
Screen 4: Gear Circuit Diagnostic
This screen displays the resistance value (in ohms) being
re
ad at the gear switch input of the gauge.
NOTE: 10-20% Variance from these reading is within
normal parameters.
5. Programmable Service Interval:
The purpose of the programmable service interval is to
pro
vide the consumer and dealer with a convenient
reminder for routine maintenance. When the ATV leaves
the factory, this feature is set at 50 hours.
Once the service interval mode is set with the hours when
se
rvice is due, the hours of actual engine operation are
subtracted from the set hours until 0 is reached. When the
counter reaches 0, the wrench icon will flash quickly for 10
seconds each time the vehicle is started as a reminder that
the periodic maintenance is due.
Set at 50 hours from factory.
To Next Page
Loading...
Need help?
General
