POLLOGEN Legend Pro - INITIAL SET UP; Unpacking the System

Legend Pro™ System User Manual Version 7
Proprietary Information of Pollogen a company of Lumenis 28
10. INITIAL SET UP
The System designed for simple installation. To install the system, follow the subsequent procedure:
10.1 Unpacking the System
Unpack the System and verify that the system is intact and that all its components are present.
Recommended for future safe transport of the device, that the original box and internal packaging be
saved.
Make sure to remove all covers and wrappings from all parts prior to the installation of the system.
The system is comprised of the following modules:
1. Main Unit
2. Applicator VO
3. Applicator 1
4. Applicator 2
5. Applicator 3
6. Foot Switch
7. Patient-Controlled Manual Switch
8. Non-Contact Infrared thermometer
9. 2 Applicators holders (Including 2 screws)
10. Power Cable
11. User Manual
12. Disposables – 1 Box– H7X7 TF Tips
13. Disposables – 1 Box– gen36 VO Tips
14. Disposables – 1 Box– gen36L VO Tips
15. Disposables – 1 Box– gen100 VO Tips
16. Disposables – 1 Box– gen12 VO Tips
Figure 16: Unpacking the System