POLLOGEN Legend Pro - WARRANTY TERMS

Legend Pro™ System User Manual Version 7
Proprietary Information of Pollogen a company of Lumenis 58
16.
Energy cannot be
adjusted
Touch Screen
failure
No feedback on touch screen
when Slider or button are
adjusted
Contact local Lumenis
representative for service.
17.
Energy cannot be
adjusted
Failure to enter
treatment
Mode.
Machine in Ready Mode
Press shortly on FS to enable
Mode calibration
18.
No Energy
output
PPB Failure
No Energy output
Contact local Lumenis
representative for service.
16. WARRANTY TERMS
This product is subject to strict quality control performed by the manufacturer. For this reason, the
distributor in your country guarantees proper function of your product for 12 months from date of actual
purchase. If you use the device properly, follow all instructions outlined in the user manual, you can enjoy
the product to your ultimate satisfaction.
This policy warrants the support that the distributor provides for the device, should it happen that failures
attributable to manufacturing defects be found. In such case, you shall be entitled to make full use of the
benefits of this warranty. This implies the reason and replacement of parts, free of charge (regarding both
service and parts) at any Authorized Service Center. Within its validity term, you are entitled to make use of
the warranty if necessary to have a fully enjoyable product, provided the above-indicated conditions are
fully met. This warranty is valid for the device marketed by the distributor in your country.
The warranty is not valid when:
1. Amendments in the warranty policy, sales receipt or invoice, or the absence of any of these original
documents.
2. Damage or deterioration of the device due to improper use or if the device has been modified or
repaired by an unauthorized third party.
3. Damage of the product due to defects incurred during transportation, such as bumps, bangs or
improper handling.
4. Damage due to humidity or any kind of liquids, foreign bodies inside the device or the use of
unapproved, unadvised accessories with the device contradictory to the user manual.
5. When the device is not used in accordance with the respective user manual or with its supplied
accessories.
6. Partial or total damage or loss of the device, due to natural disasters (such as earthquakes, floods,
fire, lightening, etc.), force majeure or accident.
7. Damage to the device after being subject to high dust environments, humidity or application of
excessive voltage from the power inlet.
8. If the product’s serial number has been amended or erased.
9. To cosmetic damage, including but not limited to scratches and dents.