Legend Pro™ System User Manual Version 7
Proprietary Information of Pollogen a company of Lumenis 47
treatment details: treatment tip to be used, suitable treatment parameters and any other special
treatment requirements.
Five types of tips are available: gen 36 (6x6),gen36L (6x6), gen100 (10x10), gen 12 (6x2) and H7X7.
Topical anesthetic may be applied on the treatment area prior to treatment. It is recommended to
use EMLA. Use the anesthetic according to manufacturer guidelines. Pay attention to any
contraindications for use
Post anesthesia, anesthetic should be removed according to IFU of the selected product. Ensure that
all anesthetic has been removed and that the skin is completely clean & dry before commencing
treatment
Before starting the treatment, always verify chosen parameters on the screen
When placing the Applicator on the skin, make sure it is not transmitting power energy (foot switch is
not pressed and LED indicator on the applicator is not orange)
It is recommended to use Low power settings during initial phases of the first treatment. Assess the
immediate response and if the immediate response is mild and well accepted by the patient, you can
gradually increase the power level if needed.
Using higher treatment parameters than needed can lead to undesired adverse effects
Place the Applicator on the skin with slight pressure to ensure you have full contact. In areas with
uneven skin surface it is recommended to stretch the treatment area (using your fingers) before
placing the tip on it. Use less pressure over bones and delicate skin
When moving the Applicator to the area of the next pulse, place the tip adjacent to the previous
pulse. Overlapping may induce excessive reaction especially if occurs when using high parameters
Avoid stacking pulses
Specific treatment parameters are individual and should be adjusted (increased or decreased)
according to patient feedback and skin tolerance. In the case of patients with sensitive skin, it is
recommended to use Low power settings and elevate if needed at following treatments
Areas over dental crowns, caps, braces or metal fillings may be sensitive to treatment and dental rolls
or folded gauze may be used to cover them
Warnings:
Never treat the area below the eyebrow, over the eye lids and eyeballs
When working around the eye, always make sure to treat only over bone area
Never treat over the lips
During the treatment, skin should be clean and dry
During the treatment, no coupling medium such as lotion, gel, oil or glycerin is allowed to be used
Ensure that the Applicator’s tip is free of debris and is thoroughly dry
After treatment, no other treatment should be performed until the treated area has completely
healed
To Next Page
Loading...