Polysoude P6 HW - The Tube to Tube Sheet Welding Heads; Accessories; Fig. 3.7 - TS 34 Welding Head; Fig. 3.8 - TS 2000 Welding Head

THE ART OF WELDING
P6 HW
PN-0110008 Rev. 12 17-100
The tube to tube sheet welding heads3. 2. 3.
TS welding heads to meet sought-after produc-
tivity and quality requirements.
TS25, standard head for welding tubes/plates.
Closed head, designed for fl ush or slightly
protruding tubes.
TS 34
(Fig. 3.7), standard head for welding tubes/
plates for applications with high duty cycles.
Closed head, designed for fl ush or slightly
protruding tubes.
TS 2000 (Fig. 3.8) and TS 8/75 (Fig. 3.9), standard
head for welding tubes/plates.
Open head, designed for fl ush, protruding or
sunken tubes.
Accessories3. 2. 4.
POLYFIL-3 (Fig. 3.10) External wire feeder.
Wire feeder with linear drive using four rollers.
Absence of distortion of damage to the surface
of the wire.
Fig. 3.7 - TS 34 welding head
Fig. 3.10 - Polyfi l-3 wire feeder
Fig. 3.8 - TS 2000 welding head
Fig. 3.9 - TS 8/75 welding head