3-25
For a Single Device:
1. SLC Addr Prog menu, press 1Single device.
2. SLC PGM“Connect Device” prompt
3. “Found Address: xx” prompt .
y ENTER to continue.
y “Writing Addr: XX” prompt
“Found Addr: XX, New Addr: XX” prompt
y
y
Press4. ESC
For Multiple Devices:
1. SLC Addr Prog menu, press 2 to Mult device.
•y Start Address: XX” prompt
•y ENTER.
•y “Connect Device”
Connect 12.
st
“Addr = XX Next = XX Remove” prompt
•y three (3) beeps.
•y “Addr = XX Next = XX Remove” prompt
•y
Notes:
•y “Addr = XX” “Next = XX”
•y Class B DCM-4UP ARROW
Press3. ESC
To Next Page
