See section
“Communications”
SD300 family is compatible with the most
commonly used communication protocols
(Profibus-DP, Modbus TCP, Ethernet IP,
CANOpen…), thanks to its optional boards.
Please refer to section “Communications” when
purchasing additional communication boards.
Expansion module I/O: 3 Digital Inputs, 2 Digital
Outputs, 2 Analog Inputs and 1 Analog Output.
Please refer to section “Extension I/O ” for further
information.
UL open type and enclosed type 1 certification:
• UL open type is offered by default.
• UL enclosed type1 needs conduit kit
(option) installation.
Ask for the Conduit Module that corresponds to
your drive frame for NEMA1 compliance. Please
refer to section “Conduit Kit” for further
information.
The heat sink can be mounted outside of the
panel in case the space is limited.
Ask for the flange that corresponds to your drive
frame. More information about this item can be
found in section “Flange Type”.
Display extender kit 3 meters.
To Next Page
Loading...