Power Electronics SD300 Series - 12 Status Messages; List of Status Messages

SD300
POWER ELECTRONICS
94
STATUS MESSAGES
12. STATUS MESSAGES
List of Status Messages
Screen
Name
Description
FLT
Fault trip
The drive is in fault state
DCB
DC Brake
The SD300 has injected DC current to stop the motor.
STP
Stopping
The drive is decreasing the output frequency due to a
stop order.
DCL
Decelerating
The drive is decreasing the output frequency. The
motor is decreasing its speed, it is decelerating.
ACL
Accelerating
The drive is increasing the output frequency. The motor
is increasing its speed, it is accelerating.
RUN
Running
The drive is operating at reference speed. The motor
will keep the introduced speed as setpoint. Operating in
nominal rate.
RDY
Ready
The drive is ready for commissioning.
12