Power Electronics SD300 Series User Manual

POWER ELECTRONICS
SD300
REVISIONS
3
CONTROL OF REVISIONS
DATE
REVISION
DESCRIPTION
02 / 05 / 2017
A
First edition.
15 / 05 / 2017
B
Accessories. Subsidiaries. Misprints corrections
30 / 05 / 2017
C
Technical Characteristics. Mechanical. Installation.
Maintenance.
28 / 11 / 2017
D
Safety Instructions, Mechanical Installation, Power
Connections, Warning & Fault Messages, Description
of Programming Parameters, Modbus Communication,
Configuration Register, Declaration of Conformity CE,
Contact Information.
14 / 08 / 2018
E
Permanent magnet synchronous motor control.
Commonly used configurations.
11 / 10 / 2018
F
Commonly used configurations.
28 / 02 / 2019
G
References adjustment. Power terminals for IP66
The equipment and technical documentation are periodically updated. Power
Electronics reserves the right to modify all or part of the contents of this manual without
previous notice. To consult the most updated information of this product, you may
access our website www.power-electronics.com, where the latest version of this manual
can be downloaded. The reproduction or distribution of the present manual is strictly
forbidden, unless express authorization from Power Electronics.

Power Electronics SD300 Series Specifications

General

Brand	Power Electronics
Model	SD300 Series
Category	Inverter
Language	English