■ 2 Your balance
12
2.2 Application, conformity, labelling
2.2.1 Correct use of the balance
The balance may only be used for the weighing of solid-materials and
of liquids filled into secure containers and for animal weighing and
density determinations.
The maximum allowable load of the balance must never be exceeded,
otherwise the balance may be damaged.
In using the balance in combination with other appliances, the current
regulations for the safe use of the relevant attachments and their ap-
plication in accordance with instructions must be observed.
2.2.2 Conformity
The balance has been manufactured and tested in accordance with
the standards and recommendations set out in the enclosed certificate
of conformity.
The power adaptor produced for the operation of the balance and
intended exclusively for this application, complies with the electrical
protection class II.
2.2.3 Labelling
Label Location of label
Manufacturer's name-
plate (1)
Casing-front, middle
Nameplate (2) Casing-front, left
Weighing range (3) Casing-front, right, first column
Calibration value (4) Casing-front, right, second column above
Readability (5) Casing-front, under the calibration value
Model plate (6) Casing-underside, centre rear
Serial No. plate (7) Casing-rear, left, under the bubble level
Tab. 2.1 List of appliance labels
To Next Page
Loading...
