Precisa Series XT - Setup for SET APP. COUNT

■ 6 Working with the Application Menu
44
• Display in the “UNITS” application:
6.4 Setup for “SET APP. COUNT”
See Chapter 4.4 “Activating the two main menus” and Chapter 4.5
“How the menu control operates” for the activation of the Application
menu.
With the aid of the “COUNT” program you can count items of uniform
weight (screws, balls, coins, etc.).
For this, you must first weigh a defined number of items (for example
5 items) and assign the reference number of pieces to the reference
weight so obtained by pressing the corresponding function key.
Depending on the weight and tolerances of the objects to be counted,
you should count a representative number of items for the regulation
of the reference-weight.
• Assigning the function keys:
+ 8.070 9
By pressing the relevant
function key the weight
display is switched to the
corresponding unit.
9k9Tlhct
GGGG
«A»«B»«
C»«D»
•SETUP
APPLICATION
COUNT KEY-1 5 Reference-number of pieces = 5
KEY-2 10 Reference-number of pieces = 10
KEY-3 25 Reference-number of pieces = 25
KEY-4 50 Reference-number of pieces = 50
«5» definition of 5 items as the reference number
to
«50» definition of 50 items as the reference number