Precisa Series XT - Print functions

■ 5 Working with the Configuration menu
32
Printing conventions used in this document:
• The settings in the sub-paths pre-programmed in the works are prin-
ted in bold in these operating instructions.
• For greater clarity, only that part of the menu tree which corre-
sponds to the function is shown with each description of the
function.
• You will find the entire menu tree for the configuration menu in
Chapter “”.
• Explanations of the menu functions are printed in italics.
5.2 Language-function
To activate the menu see Chapter 4.4 “Activating the two main me-
nus” und Chapter 4.5 “How the menu control operates”.
In order to alter the language, proceed as follows:
• Activate the configuration menu (see Chapter 4.4.1 “Activating the
configuration menu”)
•Press «
D»repeatedly, until the currently activated language is
shown.
•Press «
E». The display begins to blink.
•Press «
D» repeatedly until the language you require is shown.
•Press «
E» in order to confirm the selection.
•Press «esc», in order to quit the menu.
• LANGUAGE
SPRACHE DEUTSCH
LANGUAGE ENGLISH
LANGUE FRANCAISE
select language