Precisa Series XT - Selecting a working program

■ 5 Working with the Configuration menu
40
5.11 Anti-theft encoding
To activate the menu see Chapter 4.4 “Activating the two main me-
nus” and Chapter 4.5 “How the menu control operates”.
If the anti-theft encoding is activated, a four-figure code must be
entered after every interruption of the power supply in order to release
the balance for use.
For further information on the anti-theft encoding see
Chapter 4.7
“Anti-theft encoding”.
To activate the anti-theft encoding, proceed as described for pass-
word protection.
5.12 Key tone
To activate the menu see Chapter 4.4 “Activating the two main me-
nus” and Chapter 4.5 “How the menu control operates”.
If the key tone is switched on, a short audio signal sounds each time
a key is pressed.
5.13 Contrast
To activate the menu see Chapter 4.4 “Activating the two main me-
nus” and Chapter 4.5 “How the menu control operates”.
Setting the display contrast in balances with LCD readout.
• THEFTCODE
THEFTCODE
––––
THEFT-PROTECTION ON/OFF Switch encoding
on/off
NEW CODE _ _ _ _ Enter new code
•KEY TONE
KEY TONE ON/OFF Switch key tone on and off
•CONTRAST
CONTRAST 6 Set contrast Only with LCD displays