Precisa Series XT - Setting the Statistic-Functions

■ 10 Practical examples
72
10.2.2 Setting the statistic-functions
In order to store measurements, and subsequently be able to appraise
them statistically, proceed as follows:
• Activate the Application menu
SET STATISTIc
•Press «D» repeatedly until
“SET STATISTIC” appears.
•Press «B»
MODE OFF
• The display changes to “MODE
OFF”
•Press «
E»
MODE OFF
• The display flashes
•Press «
D» repeatedly
•“MODE STATISTIC”, “MODE
RECORDER”, “MODE STAT./
RECORDER” and “MODE OFF”
appear
MODE STATISTIc
• Define the application
(see Chapter 6.12 “Setup for the
statistics-program”) and store it
with «
E»
•Press «
D»
COUNT 100
• “COUNT 100” appears
•Press «
E»
COUNT 100
• The display flashes
Press «
D» or «C» repeatedly until
the desired COUNT (max. 999) is
displayed and press
COUNT 3
«E» to store your selection.
•Press «
D»
RECORDING MANUAL
• “RECORDING MANUAL”
appears
•Press «
E»