10 Practical examples ■
73
Press «MENU», in order to return to the weighing mode again.
The balance now shows “0.00 g”.
If you hold down the Change key «
F», “COUNT”, then “STATI-
STICS”, then “WEIGH”, then again “COUNT” and so on appear in the
info-line one after the other.
Hold down the Change key, until “STATISTICS” is shown and then
release the key. The following display appears:
RECORDING manual.
• The display flashes
Press «
D» repeatedly until the
desired type of storage is
displayed and then
RECORDING LOADCHANGE •press «E» to store your
selection.
0.000 9
STO 0 RES INF
GGGG
«A»«B»«
C»«D»
8.050 9
• Place the first item
(e.g. a pin) on the
scale pan.
• Press «STO 0» to start
the recording.
STO 1 RES INF
GGGG
«A»«B»«
C»«D»
8.150 9
• Place the second pin on
the scale pan
STO 2 RES INF
GGGG
«A»«B»«
C»«D»
7.820 9
• Place the third pin on the
scale pan
STO 3 RES INF
GGGG
«A»«B»«
C»«D»
To Next Page
Loading...
