Precisa Series XT - The Print Key PRINT; The Change Key F

■ 7 Special operating keys
58
7.2 The Print key «PRINT»
• Print out an individual value or a report
– Ensure that the balance is in the weighing mode
– Briefly press «PRINT»
– The individual value or report will be printed out.
• Reset product counter to 1
– Ensure that the balance is in the weighing mode
–Keep «PRINT» pressed until “RESET PROD.-COUNTER” is
displayed
–Release «PRINT»
– The product counter will be reset to 1.
• Print out a balance status
– Ensure that the balance is in the weighing mode
–Keep «PRINT» pressed until “PRINT STATUS” is displayed
–Release «PRINT»
– The balance status will be printed out.
• Print out the application-setup
– Ensure that the balance is in the weighing mode
–Keep «PRINT» pressed until “PRINT APPLICATIONS” is displayed
–Release «PRINT»
– The application-setup will be printed out.
7.3 The Change key «F»
• Switch to other applications
– As long as you keep «
F» pressed, all active applications are
shown one after the other:
if, for example, the statistics program, the check+/- program and
the «COUNT» application are activated, «BALANCING»,
«CHECK +/-», «STATISTIC» and «COUNT» appear in the info-line
one after the other:
–Release «
F» when the application to which the balance should be
switched, appears in the display.