Precisa Series XT - Setting for Counting by weighing

■ 10 Practical examples
70
10.2 Selection of an Application program
See Chapter 4.4.2 “Activating the application menu” for the activati-
on of the Application menu.
10.2.1 Setting for Counting by weighing
For Setup, see Chapter 6.4 “Setup for “SET APP. COUNT””
To count uniformly heavy objects such as coins, screws or similar
things, proceed as follows:
• Activate the Application menu
SET APP. OFF
•Press «D» repeatedly until
“SET APP. OFF” appears
•Press «
E»
SET APP. OFF
• The display flashes
•Press «
D» as often as required un-
til “SET APP. COUNT” appears
SET APP. count
•Press «E» to confirm the
selection of application
•Press «
D»
SETUP APPLIcATION
• “SETUP APPLICATION”
appears
•Press «B»
KEY-1 5
• “KEY-1 5” appears
(Indication of reference number)
•Press «
D»
KEY-2 10
• “KEY-2 10” appears
•Press «
E»
KEY-2 10
• The display flashes
• You can change the value by
pressing «
C» or «D»
KEY-2 8
•Press «E» to store the new value