10 Practical examples ■
71
When you have set the values for “KEY-3” and “KEY-4” in the same
way, press «MENU», in order to return to the weighing mode.
The balance now shows “0.00 g”.
You can switch to “COUNT” by prolonged pressing of the Change key
«
F».
The following display appears:
0.000 9
•Place five of the items to
be counted
(e.g. paper clips) on the
scale pan.
5 8 25 50
GGGG
«A»«B»«
C»«D»
3.720 9
• Press «5»
(assigned reference part
count = 5)
5 8 25 50
GGGG
«A»«B»«
C»«D»
5 PCS
• The weight is now
recalculated and
displayed as pieces (PCS)
5 8 25 50
GGGG
«A»«B»«
C»«D»
237 PCS
• Now place all the items
to be counted on the
scale pan
5 8 25 50
GGGG
«A»«B»«
C»«D»
• The number will now be
displayed
NOTE
Depending on the weight and tolerances of the items to be counted
you should count out a representative number of items for the de-
termination of the reference weight.
To Next Page
Loading...
