Precisa Series XT - Starting up; Unpacking the balance

2 Your balance ■
13
The balance shows the following labels:
Fig. 2.3 Balance labels
2.3 Data and parameters
The balances of Series XT are divided into five main-groups A, C, D,
G and M. The letter in the name corresponds to the design specifica-
tion (e.g. A = analytical balance, M = MilIigramme balance) the num-
ber before it corresponding in each case to the maximum allowable
load (in grammes).
The allowable weighing range, the calibration value and the readability
of the balance are printed on the casing (see Tab. 2.1 List of appliance
labels) and are therefore not presented here.
6
7
xx xxxx x
Max. 2200 g
Min. 0,5 g
e=0,1g
d=0,01g
2HA?EI=
1
2
3
4
5
PRINT
ON/OFF
MENU
T
T
clr
ins
esc