Precor Experience P62 User Manual

SYSTEM TESTS
MENU
TEST DESCRIPTION
range, levels 1 to 20.
l A/D: Lift potentiometer analog to digital voltage value.
l Glitches:number of sticking lift motion.
l Volts (DC): lift motor voltage.
Auto Stop Test menu: System Tests > Auto Stop Test
Test parameters;
• Status - User detected on running belt
• Step Count - Average # of footplants. Footplant averaging delay reset
with each speed change.
Belt Speed Test menu: System Tests > Belt Speed Test
Tests belt operating condition in 0.1 speed increments
Test parameters:
• AMPS IN: Treadmill input Current.
• VOLTS IN: Treadmill input Voltage
• VBUSS: Treadmill internal buss Voltage
• AMPS MTR: Current supplied to the drive motor.
Incline Test menu: System Tests > Incline Test
Test parameters;
• A/D - lift motor incline position potentiometer A/D number.
• SEC - UP/DWN command response delay between the UPCA and
LPCA.
• Glitches - Momentary failures in the A/D potentiometer output. If there
are more than 50 Glitches, the lift motor should be replaced.
USB Test menu: System Tests > USB Test
List the active USB ports.
Touchscreen
Test
menu: System Tests > Touchscreen Test
Verify touchscreen display.
Touchscreen Cal-
ibration
menu: System Tests > Touchscreen Calibration
Calibrates touchscreen finger press operation.
Backlight Test menu: System Tests > Backlight Test
Tests the display backlight performance.
RGB Test menu: System Tests > RGB Test
Tests the display color performance.
Numeric Back-
light Test
menu: System Tests > Numeric Backlight Test
Tests the movement controls LCD numeric displays backlight bright-
ness level.
Numeric Display
Test
menu: System Tests > Numeric Display Test
P82 Console 59
7 Standard Service Menus
Service Menu (51765761)

Precor Experience P62 Specifications

General

Brand	Precor
Model	Experience P62
Category	Music Mixer
Language	English