EasyManua.ls Logo

PREVOST H3-41 - Lubricant Specifications

PREVOST H3-41
151 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CARE AND MAINTENANCE
LUBRICANT SPECIFICATIONS
ITEM* DESCRIPTION SPECIFICATIONS
21 Engine oil
SAE Viscosity Grade: 15W40
API Classification: CG4
26 Power steering oil
Automatic Transmission fluid
(Dexron-IIE or Dexron-III)
17 Engine coolant
Low silicate, ethylene glycol coolant
50% antifreeze/water solution is normally used
Antifreeze concentration should be between 30% and 67%
22 A/C compressor oil
Polyolester Oil, HFC 134a compatible:
Castrol SW-68 (POE) or equivalent
11 Differential oil
Multigrade gear oil meeting MIL-L-2105-D: 85W140
If temperature drops below 10°F (-12°C), 80W90 should be
used, and below -15°F (-26°C), 75W90 should be used.
(In extreme conditions or for better performance, full
synthetic gear oil can be used.)
16 Fan gearbox oil Mobil SHC 630
13 Eaton transmission fluid Eaton Roadranger CD 50
13 Allison Transmission Fluid Dexron IIE, Dexron III or Transynd
--- Multipurpose Grease
Good quality lithium-base grease:
NLGI No.2 Grade is suitable for most temperatures
NLGI No.1 Grade is suitable for extremely low temperatures
* Item numbers refer to figures on lubrication and servicing points in this chapter.
110

Table of Contents

Other manuals for PREVOST H3-41

Related product manuals