7-14 Safety Features and Equipment
PA-1628Operator's ManualH3-45 COACH
ESSENTIAL FUNCTIONS TO OPERATE
THE VEHICLE (BASIC LIMP-HOME
FUNCTIONS)
Even with a defective CECM (Chassis Electronic
Control Module) or a CAN network problem,
essential base functions are maintained to rear start
the vehicle from the engine compartment and drive
in a secure manner.
AVAILABLE FUNCTIONS
l Startup: Turn on the ignition in the driver's
area and rear start the vehicle from the engine
compartment,
l Opening the door: Functions normally,
l Closing the door: Manually pull on the door
and it will lock automatically,
l Windshield wipers: Wipers functions at 1st
speed only
l Windshiels washer fluid: Lower windshield
washer
l Headlights: Low beams only,
l Directional signals: Rear and front only,
l Stoplights: 2 upper stoplights + high-mounted
stoplight are functional,
l HVAC: Functional with set point fixed at 70°F
(22°C), evaporator and condenser fixed at
speed 1, defroster fixed at speed 4.
CAUTION
The following directives must be followed.
l Never connect a battery charger when the
ignition is at the ON position on a vehicle
with a defective CAN or certain functions
will start up by themselves,
l Disconnect the charger before starting the
vehicle, if not the default functions will not
activate,
l If the default mode does not activate, try
to turn the ignition OFF while ensuring that
no charger is connected and then restart
the vehicle.
To Next Page
Loading...
