5-42 Other Features
PA-1628Operator's ManualH3-45 COACH
12. LOWER HANDRAILS: Press release button at base of handrail and lift the left handrail upward out of its
socket. Lower handrail to platform. Repeat for right handrail.
13. STOW PLATFORM: Press and hold IN button until platform reaches STOW height and then fully retracts
into vehicle.
MANUAL LIFT OPERATION
The lift can be operated manually if it loses electrical power. The following sections describe important safety
preparations to be followed before using the lift, and operating procedures to deploy, raise, lower, and stow the lift.
Ricon recommends that manual operation be used only to exit from vehicle, not to enter vehicle.
Preparation
l Park vehicle on a level surface, away from traffic. Allow sufficient space for lift operation and passenger
boarding.
l The operator must summon assistance to move vehicle to a safe operating area if a breakdown situation
exists and vehicle cannot be moved under its own power.
l Check to be certain obstacles are not in path of platform movement.
l Open vehicle doors by hand and secure.
l Caution people in vicinity that platform is about to deploy.
l Follow the "Safety Precautions".
Manual Lift Controls
Manual operation components used are a hydraulic backup pump and pump handle, platform release mechanism,
and a rollstop control knob.
To Next Page
Loading...
